Kode error canon MX 377 MX370

Download Kode error MX377 doc
Resetter Canon MX377

Error Code Canon as an error in the operation of the printer, the printer does not work. Users can see code Error code and remedies can also be used as a guide in the initial call to ask how to get the code.

1.Error Code U051, Error Code U052.

Details on the wrong cartridge.

Workaround. Remove the cleaning cartridge from the second circuit and put a new toner cartridge may be damaged if not lost.

2.Error Code U59.

Description: There is a problem with the ink cartridge, cartridge installed is not compatible with this version, the cartridge is not installed.

Workaround. How to put a number on the cartridge used with this version or not. Cartridge and the cleaning circuit and replace it if lost cartridge may be damaged.

3.Error Code U053.

Detailed toner cartridge is not installed correctly.

Initial solutions. The ink cartridge cleaning out the second circuit and insert it into the new one.

4.Error Code U075, Error Code U076.

Description An error occurred on the cartridge.

How to be a chore. The ink cartridge cleaning out the second circuit and insert it into the new one.

5.Error Code U140.

Details about the crash on the cartridge.

Workaround. The ink cartridge cleaning out the second circuit and insert it into the new one.

6.Error Code U150.

Profile cartridges can not be used.

Workaround. The ink cartridge cleaning out the second circuit and insert it into the new one.

7.Error Code U162.

Profile ink.

Workaround press the Stop / Reset button for 10 seconds to clear the status of the ink and the print job.

8.Error Code U163.

Profile ink.

Workaround press the Stop / Reset button for 10 seconds to clear the status of the ink and the print job.

9.Error Code Contact Service Center.

The plan details the ink absorber is nearly full.

Workaround press the OK button to start printing.

10.Error Code Printer Error occurred 5B02, Error Code 5B04, Error Code 5B12, Error Code 5B14.

Description An error occurred on the printer.

Workaround. Turn off and unplug the power cord and leave it for a while. Plug the power supply and try again, if not cured the mechanics of the machine may be damaged or defective.

11.Timeout error press (OK).

Details of the work by the time the order within the specified time.

Workaround Press Stop / Reset to clear the problem and try again.

12.Failed to scan the head alignment sheet pree (OK).

Description Automatic Print Head alignment failed.

Workaround. Cancel the print head alignment by pressing the Stop / Reset and position yourself where you can easily remember.

13.Remove the protective material or tape.

The materials to prevent the cycle has not been removed.

The solution to the initial temperature. Remove the tape cartridge from the circuit and replace it.

14.Printer error occurred xxxx, Printer error occurred 5100.

Specification error.

Workaround. Unplug the power cord wait. And off.

15.Load paper, Load paper and press (OK).

Details are in the section of the paper.

Workaround. Paper out and replace it. The paper must not be too tight and there is a space, then press the OK button to start printing again.

16.Document in ADF Press (OK).

Details are in the attached document ADF (automatic feeding system).

Workaround. Remove the paper from the ADF paper and press the OK button to start again.

17.Set Document on ADF press (OK).

No detailed documentation in the form of transfers of ADF.

Workaround. Scan the documents in the ADF and press the OK button to start the scan again.

18.Close the feeder cover (OK) Eject the document.

Details are key documents in the ADF.

Workaround. To hold the document, click OK to restart, or press the Stop / Reset to cancel.

19th. Open the paper output tray.

Details Output tray does not open.

Workaround. Open the paper output tray.

20th. Cover is open, Close the cover.

Leave the details to open.

Workaround. Open a printer.

21. Paper jammed, Clear paper jam and press [OK].

Detailed paper.

Video editing basics. Remove the power cord and remove the jammed paper.

22.Data Error.

There was an error in the details - in the data.

Workaround press Stop / Reset button to cancel the job. Turn off and then on again